Emergency Vehicle Technician (EVT) L-1 Practice Exam

These questions are part of the practice quiz. Start practicing

• Where should the Opticom emitter not be mounted?
• What measurements are used to assess tire condition and safety?
• What is the primary role of a diagnostic scan tool in modern EVT maintenance?
• If a fuel leak is detected at a scene, what is the appropriate action sequence?
• Which of the following best represents the meaning of CCA in automotive battery ratings?
• The diameter of wire is described by which term?
• What electromagnetic device uses a small control current to switch a larger current?
• What key elements should be included in a patient care report for EMS transportation?
• Which unit is used to measure electrical resistance?
• Which term describes alternating headlights used on emergency vehicles?
• Which step helps minimize environmental impact when operating an EMS vehicle in sensitive areas?
• What is the EVT's basic obligation when faced with a hazardous materials incident at a scene, and what initial actions should be taken?
• What is the process for handling a vehicle recall issue that affects safety or performance?
• Opticom is best described as which system?
• Which statement about documentation is NOT true?
• In Ohm's Law, if the resistance increases while voltage remains constant, what happens to current?
• Which component is used to amplify or switch electronic signals?
• How should a vehicle be inspected for leaks and what is the protocol if a leak is detected?
• What is a typical consequence if coolant is not circulating properly in the engine cooling system?
• When inspecting electrical components, what is a key indicator of a poor ground connection?
• Which signs indicate steering or suspension problems in an emergency vehicle, and what immediate actions should be taken if noticed?
• What is a common symptom of a failing alternator in an emergency vehicle?
• What is the recommended practice for placing emergency lighting and warning devices to maximize visibility and safety for oncoming traffic and pedestrians?
• What is the primary reason maintenance activity documentation is critical in EVT programs?
• TPMS stands for which system?
• When is it appropriate to perform non-destructive testing (NDT) on structural components?
• Which instrument is used to measure voltage, current, and resistance in automotive electrical systems?
• When approaching a scene, what are the key positioning principles to reduce risk to responders and patients in an active roadway environment?
• Which hose assembly should be checked for wear on rescue tool circuits?
• Mount antenna at least ____ away from everything.
• What is the key reason for regularly checking for fuel leaks or overheating as part of basic fire safety?
• What steps should you take to verify a vehicle recall has been addressed before operation?
• What is the function of a capacitor in an electrical system?
• GPS stands for which system?
• How can you identify a chafed wire in an emergency vehicle harness?
• 'Blocking Traffic' corresponds to approximately 4,500 cd-s/m and SAE Class 2; Which SAE class matches?
• Which factor is NOT typically considered when selecting emergency lighting?
• Which condition can degrade dash light LEDs?
• After a call, what should be logged or documented to ensure readiness for the next assignment?
• What is a common risk with high-voltage components in some modern emergency vehicles, and a mitigation?
• Which indicators are used to verify that wiper blades are functioning and parked correctly?
• How should the air system pressure regulator be tested to verify proper operation during a pre-use check?
• What safety devices are common on EMS vehicles to protect responders and patients during transport?
• Which statement best describes the role of maintenance documentation in warranty claims?
• Which term refers to a device used for recovering stolen vehicles?
• During a charging system test, which sequence best ensures accurate results?
• SIR/SRS refers to which vehicle safety restraint system?
• What is a typical maintenance check for an EVT's HVAC system before deployment?
• What are the essential steps and how often should on-shift checks of emergency medical equipment be performed?
• If wiring is shorted to the vehicle frame, what hazard can occur?
• Which SAE class corresponds to 18,000 cd-s/m?
• What should be included in a PM checklist for lights and sirens on an emergency vehicle?
• What brand name is used for a stolen vehicle recovery system?
• Which practice best supports safe and efficient transport while preserving patient privacy?
• Which statement best describes how ambient temperature affects battery performance in emergency vehicles?
• What is the purpose of a fuel system purge during maintenance?
• What tire maintenance practices are essential for an emergency vehicle, and how should you handle a damaged tire during a response?
• What is the role of department policy in deciding when to transport a patient with a non-urgent condition?
• Which component stores energy by creating an electric field between plates?
• During pre-trip inspection, what is evaluated regarding emergency equipment?
• What factor should be monitored to ensure the battery storage environment remains aligned with guidelines?
• Install computer power supply to provide power from which arrangement?
• During electrical fault diagnosis, what does back-probing involve?
• How would you verify proper fuel system operation after a line repair?
• Which practice supports preventing theft or tampering of medications in the EMS vehicle?
• Flashback from the dash can interfere with which aspect of driving?
• What are the general rules for using red and blue lights and sirens on an EMS vehicle, and when should you deactivate them?
• Which statement best describes cleaning and sterilizing reusable medical equipment between patients?
• When replacing fuses in a circuit, you should not exceed fused rating by more than the specified value.
• Which fluid levels are included in the pre-trip inspection checklist for an emergency vehicle?
• A high voltage gaseous discharge flash tube is typically part of a lighting system called what?
• Describe the function and a key safety consideration of an auxiliary hydraulic system used for rescue tools.
• Which acronym refers to a display technology commonly used in screens and meters?
• Which distance is the correct minimum for mounting the antenna away from everything?
• ALVS stands for what in the context of vehicle tracking?
• What is a typical sign of moisture contamination in an air brake system and how is it addressed?
• Which step most appropriately supports readiness for the next call after transport?
• What term describes a closed electrical circuit where current splits into multiple paths then recombines to complete the circuit?
• What is the main purpose of placing wheel chocks during stabilization on an uneven surface?
• Why is proper electrical grounding essential for reliable operation of EMS vehicle systems?
• What is the purpose of an air system in certain emergency vehicles, and what is a safety check associated with it?
• When fusing a circuit, what maximum distance from power source is recommended?
• When diagnosing power loss in a circuit, which additional checks are recommended besides tracing power from source to load?
• What is a primary purpose of EVOC training for EVT L-1 holders?
• Which SAE class corresponds to 4,500 cd-s/m?
• ABS stands for which automotive safety system?
• 'Identification only' corresponds to 1,800 cd-s/m and SAE Class 3; Which SAE class matches?
• In an electrical circuit, which three quantities describe the flow of electricity?
• After returning from a call, what post-trip inspection should an EVT perform to identify issues and ensure readiness for the next assignment?
• What is a recommended method to mitigate roadside hazards when parked on scene?
• What is the role of structural components in vehicle safety, and how can defects affect operation?
• Which safety features should be checked as part of the pre-trip inspection?
• How should patient privacy and data be protected during EMS transport?
• Which action is NOT essential when transferring a patient into or out of the EMS vehicle?
• If a test light shows no power at a circuit, which diagnostic approach best locates the fault?
• Which component allows current to flow in one direction only and blocks the other direction?
• Electric current is defined as the rate of electrons pass a point per second, measured in what unit?
• Which function is a diagnostic scan tool used to perform?
• Which items must be checked during a pre-trip inspection of an emergency vehicle to ensure safety and readiness?
• Which statement corresponds to Kirchhoff's Voltage Law?
• Which component is abbreviated as LED?
• How should EMS equipment and patient care items be stored on the EMT transport vehicle to prevent contamination and ensure accessibility?
• Why is proper climate control important in an EMS ambulance, and what steps ensure regulation?
• What safety procedure should be followed before disconnecting any high-energy circuit?
• What types of fire extinguishers are typically found on EMS vehicles and how should they be inspected and maintained?
• Which safety measures are essential when stabilizing an EMS vehicle on uneven terrain with hydraulic jacks and vehicle stands?
• Which is NOT a component of the 3M Opticom Priority Control System?
• In what scenario is it most appropriate to document actions using an electronic incident report with timestamped entries and a proper chain of custody?
• What are key fuel safety practices to prevent fire and spills when refueling or fueling at a scene?
• Do not install wiring where it will interfere with which system?
• In an air-brake system, what powers the brakes, and what distinguishes it from hydraulic braking systems?
• Hz is the unit used to measure which electrical quantity?
• Name a common emergency vehicle warning light and explain the rationale for color choice.
• What does 4WAL stand for in vehicle braking systems?
• What indicates that visible cracking or deformation has occurred in a structural component and may require NDT?
• Which term denotes opposition to current flow in an electrical circuit?
• Which action is NOT appropriate after transporting a patient with an infectious disease?
• After disconnecting a vehicle battery, why is it important to isolate the battery?
• When servicing or approaching high-voltage components on hybrid/electric emergency vehicles, what safety precautions must be observed?
• SAE is an acronym for which organization?
• RFI is the acronym for what electrical interference?
• After a line leak is found during maintenance, what is the proper procedure?
• During transport, which infection control practices help protect patients and staff?
• A material in which electrons are tightly bound and movement is inhibited is best described as a
• Which three quantities describe the flow of electricity in a circuit?
• Split Loom is a term used for a protective wrapper around wiring. Which option corresponds to Split Loom?
• How is Ohm's Law applied in diagnosing a simple electrical circuit fault?
• What is the proper sequence for disconnecting a vehicle battery to work safely?
• Which statement best describes basic fire safety measures for EMS vehicles?
• What is a common cause of a soft brake pedal in an air brake system, and how is it corrected?
• What is the primary purpose of a diode in a circuit?
• Which action best confirms the vacuum assist system is functioning during testing?
• What is the decibel rating of Class A sirens?
• What is the function of a proper electrical ground strap in a vehicle?
• Electrical resistance is measured in which unit?
• Which installation guideline for electrical systems is true?
• In an air-brake system, what is the function of the condensate drain?
• Do not run radio wiring with which cables?
• What is the primary safety purpose of a backup alarm on an emergency vehicle?
• What action should be taken if a wheel lug nut is found under-torqued after service?
• What is the recommended post-call cleaning/decontamination action for EVT vehicles?
• What is a key reason to follow manufacturer torque specs when installing components on an emergency vehicle?
• How does the posted speed limit and road conditions influence following distance and stopping distance for an emergency response vehicle?
• What is the benefit of adhering to manufacturer torque specs for lug nuts?
• Which term is an acronym for a navigation system that uses satellites?
• What is the typical sequence for replacing worn brake pads on a disc-braked emergency vehicle?
• Which device typically has the highest parasitic draw when plugged in but not actively powering equipment?
• What is an air-ride suspension, and where is it commonly used on emergency vehicles?
• Which concept describes the relationship between voltage, current, and resistance in a circuit?
• Electric current is measured in which unit?
• In electronics, which voltage type changes direction periodically?
• What is a best practice when charging the vehicle's 12-volt and auxiliary batteries?
• What strategies should be used to secure equipment and patients during transport to minimize motion injury and noise?
• During PM, how would you verify the integrity of a siren activation circuit?
• Which of the following best describes the function of fuses and relays in electrical circuits?
• During downtime, which steps should be taken to ensure EMS equipment is ready for the next call?
• What is the minimum distance the Opticom emitter should be kept away from a radio antenna?
• Which standards or guidelines are typically referenced for emergency vehicle maintenance and inspection?
• What PPE and high-visibility requirements should be worn by EVT personnel when operating the vehicle and on scene?
• Name the essential fluid levels that must be checked during vehicle prep and the acceptable ranges.
• Following a fuel line repair, what demonstrates proper fuel system operation?
• LCD stands for which display technology?
• What is the purpose of a hydraulic system pressure test on rescue tools?
• How can you verify coolant is circulating properly in the engine cooling system?
• How do adverse weather conditions affect EMS vehicle operation and what adaptive practices should be used?
• In a quick-disconnect pair, the male terminal should be connected to which side of the circuit?
• In an electrical circuit, impedance is best described as which of the following?
• To avoid battery drain on an EMS vehicle during a long response, which plan is correct?
• What is a parasitic drain, and how is it tested?
• Which item is essential to include in a patient care report to ensure accountability and continuity of care?
• Which organization develops and publishes engineering standards for the automotive industry?
• How does EVT typically fit into the incident command structure on-scene, and what is the role during multi-agency incidents?
• Why should backup alarms be tested during preventive maintenance?
• If you detect a brake-fluid leak during pre-run checks, what is the correct course of action?
• What is the function of a vacuum assist system in power brakes, and how can you verify it works?
• Which symptom most strongly indicates a poor vehicle chassis ground?
• To protect patient privacy when transporting, which device-related security measure is recommended?
• Which items should be included in a basic PPE checklist when performing maintenance?
• What is AC voltage?
• If using a 120VAC inverter connect inverter directly to which source?
• What action is essential as part of infection control between patients on EMS transport?
• Which of the following would be a valid component of the Opticom system?
• How should medications and controlled substances be stored and secured in the EMS vehicle to prevent theft or tampering?
• Which component is commonly used to limit current in a circuit?
• During restraint of a patient for transport, which practice helps ensure airway and circulation after movement?
• What term describes alternating flashing head lights?
• Which SAE class corresponds to 1,800 cd-s/m?
• Which solder type is commonly used for electronics soldering due to its flux core?
• Which defensive driving techniques should EVT personnel apply under high-stress conditions?
• Which of the following is the most comprehensive PPE set for EVT maintenance?
• Which element is NOT a listed component in the 3M Opticom Priority Control System?
• If the voltage across a circuit is held constant and the resistance increases, what happens to the current?
• What is a best practice when routing secure hydraulic hoses in rescue tool operation?
• How should scene lighting be coordinated with local regulations when responding to an incident?
• What is the basic difference between hydraulic brakes and ABS in emergency vehicle braking, and which signs indicate braking issues?
• What should be done with waste generated during EMS operations?
• After draining condensate from an air-brake system, what should be the next check?
• Why is wiper condition and blade integrity critical for scene visibility, and what checks should be performed?
• 'Clearing Traffic' corresponds to what SAE class and cd-s/m value?
• IOD stands for which electrical parameter in automotive systems?
• How should you manage exposures to live wires, downed power lines, or gas leaks at a scene?
• How should you ensure the safe operation of onboard medical devices (defibrillator, suction, oxygen) and what routine checks are required?
• Why is using manufacturer-recommended fluids and lubricants important in EVT maintenance?
• What is the primary use of a transistor in electronics systems?
• What steps should you take if your EMS vehicle is involved in a minor collision while returning from a call?
• What is the purpose of a post-incident debrief and what topics should be covered?
• Which component protects sensitive electronics from voltage spikes in a vehicle electrical system?
• Which term refers to the airbag-style restraint used for occupant safety in crashes?
• What is the role of a resistor in a circuit?
• Which device uses a high voltage discharge to emit bright light in short pulses?
• What ongoing training or certification requirements should an EVT L-1 holder pursue to maintain skills and stay current with regulations?
• What is the consequence of under-torquing lug nuts on a wheel assembly?
• Identify two common hazards when performing maintenance on an energized EMS vehicle and mitigations.
• Which percentage is used to size a fuse or circuit breaker for continuous load?
• In the mappings, which term is defined as Convolute?
• Which storage condition best extends the life of vehicle batteries in a shop environment?
• What percentage of load is used to calculate the size of a fuse or circuit breaker?
• During transport, how should loose items in the patient care area be handled to reduce risk?
• DMM stands for which instrument in automotive electrical testing?
• Which component stores and releases energy in an electrical circuit?
• Voltage loss caused by resistance in a circuit is known as what?
• Explain the difference between a direct switch and a relay-controlled circuit in vehicle electrical systems.
• Which statement about patient privacy during EMS transport is correct?
• Which two indicators signal overheating in the engine cooling system?
• Which restraint approach minimizes injury while maintaining airway and circulation during transport?
• Describe the general steps to diagnose a non-start condition on a vehicle with a 12V electrical system.
• Why is it important to test the battery and alternator together when diagnosing charging issues?
• Under what circumstances is non-destructive testing (NDT) on structural components recommended?
• In the brake pad replacement sequence, which step is performed immediately after removing the wheel?
• Which term describes the opposition to the flow of electric current?
• What is the primary objective of a pre-use operational check on an emergency vehicle?
• Which device uses a 9 VDC battery with a cigarette plug to preserve vehicle memory when the battery is disconnected?
• What are the differences between lead-acid, AGM, and lithium battery types used in EVTs, and what charging considerations apply?
• What factors should be considered when selecting emergency lighting for an EVT-equipped vehicle?
• Inverter connection: which option is correct?
• Which practice does NOT reduce the risk of musculoskeletal injury when lifting and carrying equipment or patients?